3 Foot pole gun with fine finish spray tip,
no more banding over while spraying
see more how it works on the page of the RS100
10-128 Pole Gun for RS100 Sprayer
$425.00
Weight | 12 lbs |
---|---|
Dimensions | 36 × 6 × 6 in |
Related Products
30-200 Stucco sprayer hopper gun
Our Stucco Sprayer Hopper Gun 30-200 can be used for plastering a stucco house, traditional plastering of stuccos such as one coat or three coat stucco or GFRC.
The range is from 1/8″ heavy texture to 1″ thick structural layers.
It can also be used for applying plaster, hard coat stucco, EIFS, small scale shotcrete, papercrete, earthen mixes and more.
Hopper is made from stainless steel material, with a life time anti-rust guarantee.
10-127/19 Pole Gun
This style gun is excellent to use when abrasive material must be apply in tight area, if need to use with the Rotortex.
RS300-350 Road Marking Sprayer
Our new, patented 1:1 and 98:2 plural component sprayer that can deliver MMA (Methyl Methacrylate) Anti-Skid Aggregates Pavement Marking
The advantage of the RS300-350 is the capability to use an externally towed air compressor, allowing for more CFM while the unit delivers 2GPM. This provides more bike lane coverage: up to 90 square feet per minute.
19-127 Pole Gun
GFRC spray gun with remote switch, and washout cleaning kit.
16-050 Spray Tip
This fine finish spray tip kit will fit only gun part number 16-311J
Assembly guide for the fine finish spray tip. Note: item # 4 is the 5/16″ spray tip. If deferent tip will be install the texture finish will change. We recommended that you select the tip size that wiil give you the best texture spray finish that you desire.
10-050 Spray Tip
please note: this kit will fit our old style 10-311 gun and will not fit the new gun
16-311J
Assembly guide for the fine finish spray tip. Note: item # 4 is the 5/16″ spray tip. If other tips will be install the texture finish will change. We recommended that you select the tip size that will give you the best texture spray finish that you desire.